E Wind MAXS VECTOR

(Noise Reduction, Radio Noise)

These settings allow you to adjust noise reduction parameters for specific noise conditions. The Radio Profiles - Radio Noise Reduction Settings are recommended for most noise environments.

	These custom settings apply only when the Custom Noise Reduction (Radio) field is selected in the referenced Radio Profile.
	Do not modify Noise Reduction settings unless you are Qualified Service Personnel. Improper settings can cause high levels of background noise to be transmitted with voice, which can cause communications to fail.

This parameter has an effective range of 31 coefficient values of 16 bits each, which translates into 124 BCH (4-bit nibble) characters. However, the CPS requires entering 32 coefficient values. When entering in the coefficients for this vector, the 32nd value is the right-most (or least significant) value - in other words, the last 4 BCH characters. Be sure to make this 32nd value the same as the 31st. The 32nd value is ignored by the radio's digital signal processor (DSP).

Go to the Radio Noise Reduction Window